Single sending card box, Linsn, DBStar control system (Driver)

Single sending card box Linsn, DBStar control system brightness control

Single sending card box, Linsn, DBStar control system (Driver)

Description:

Driver controller is the only piece of equipment required between the video source and your LED screen.The device takes a digital video(DVI)input and converts it so it can be sent over a single CAT-5(RJ45)cable to the tiles.Compare with noumal RJ45 connector,driver controller use ethercon soft-patched connectors to make sure lock connection and better protection for the CAT5 cable.If using good quality cable,distances up to 100 meters(300feet)are easily achievable without the need for any signal booster.A single controller can drive up to 1280*1024(2048*640)resolution(up to 142 pcs P6 tiles).Driver controller is ready for cascade up to two pcs controller with push button settings,and support much higher resolution application.The mapping of each tile is also programmed with this controller,using a user friendly PC application

Connections and controls

Video input:DVI-DOutputs to screen:2 ethercon(RJ45) soft-patched connectorsPower:IECSetup port:USB-B,RS 232 on the back panel,RS 232 is used for cascadeScreen brightness control:16-levels adjustment on the front panelLED indicators on the back panel:2 power(red),1 signal A present(green)Control software:controller software

Specifications:

Power consumption:65 wattsInput voltage:85-264 volts,47-63Hz auto switchingWeight:4.5Kg(10lbs)Dimensions:48cm*26.8cm*4.4cmStandard rack size:1UCooling:Active

Single sending card box, Linsn, DBStar control system (Driver)